Machine width: 230 cm / 90”
Machine length: 257 cm / 101”
Machine height: 155 cm / 61”
Belt width: 190 cm / 77”
Belt speed: 1,07 mt/min- 3,5 ft/ min at a typical 40 second dwell time
Installed power: 16,8 KW - 73 A / 380 V+N
Average consumption: 8KW/H- 36 A
Net weight: 1.290,00 kg / 2.843 LBS
GFO 6530 SPORT
The Transmatic 6530 SPORT is specifically designed for digital dye sub printing
of apparel and other industries that require cut panels or engineered prints.
A new self contained, oil heated drum system assures uniform heat across the
width of the cylinder and the lowest possible power consumption.
Transmatic oil heated drum system use 50 % less electric power than all electric
machines.
Drum size available- 33 cm / 13” to fit all the needs of the digital
industry.
The 6530 sport rush has three modes of operation:
1. Cut sheet of printed transfer paper is placed on the table with the design
facing up.
The cut fabric part( front, sleeve, collar, etc..) is placed over the design.
With the push of a button, the sheet is automatically fed into the machine.
The part and paper exit under the loading conveyor where the stripping device
eliminates all possibilities of paper shifting or shrinking which can cause
a “ghost” image.
You do not need to use the more expensive “ sticky paper”
2. Transfer paper is kept on the roll and cut fabric parts are placed on the printed design as the paper feeds continuously into the machine.
3. Traditional print of continuous fabric and transfer paper roll to roll.
Transmatic heat presses with the new oil heated drum system will increase
production, reduce seconds, and save on energy costs.
High productivity, quality engineering design and conscientious after- the
sale service are all good reasons for investing with TRANSMATIC for all needs
in dye-sub printing or textile dye fixation.
Features :
Belt feeding system with independent drive for feeding cut parts.
Oil heated drum system delivering perfectly controlled heat
2- mode loading conveyor (runs continuously or intermittently with a flip
of the switch).
Oil heated drum diameter 33 cm / 13”
Belt speeds of 1,07 mt/ min. or 1,17 yd / min respectively to 40 second dwell
time
77” (196cm ) wide nomex felt for 72 “ (180 cm) wide printing
Electro pneumatic belt steering system
Light weight Aluminium body air shaft (allows easy lifting)
Safety bar with reverse control
Automatic paper separator bar eliminates ghosting caused by paper shifting
or fabric shrinkage.
1 exit cooling conveyor cools and take printed parts to the back side for
stacking
Three independently controlled unwind and three rewind stations for roll to
roll printing (fabric paper and blotting paper)
Automatic Cool down system.
Adjustable digital speed control