High production (4,5 mt/min – 5 yd/min) rotary printer machine for transfer
printing in sublimation knitted, synthetic fabrics, and non-cloth fabric such
as polyester, nylon, acrylic.
In the case of printing directly onto polyester cloth by means of digital
printers, the calander may be used to fix the colour pigments perfectly and
at low cost.
PREPARATION FOR PRODUCTION:
The three air shafts enable the operator to take and position the transfer
paper, the material to be printed and, where necessary, the protective paper.
Using gravity to load the machine in a straight and even manner, the transfer
paper is positioned directly over the entrance to the print rollers; the tension
can be regulated by means of a pneumatic clutch control: the material is made
taut and goes through an “s” which makes the product even tauter;
the material moves over an expandable roller which ensures a straight trajectory
towards the entrance of the press.
REWINDING OF THE TRANSFER PAPER AND THE PRINTED FABRIC:
An important characteristic is that the paper and the fabric are immediately
separated after the printing phase and transported to the back of the machine
where easy access to their respective winders is ensured.
The pneumatic reel holder rods and strengthening supports have been designed
to allow the operator to remove the empty reels and reposition the said rods
in a single gesture.
The pneumatic clutch and electronic speed control allow simple adjustment
of the rewinding tension.
Technical data:
Oil-heated cylinder with 2 proportional electronic thermostats, one for checking
the oil and one for the exterior of the cylinder
Belt speed 4,5 mt/min / 5yd/min
Safety bar and reverse control
Cylinder diameter 61 cm / 24”
Adjustable belt tension
Brushless motor
Dynamic electro-pneumatic control of the belt
Automatic cylinder cooler timer
Ultra light air shafts for unwinds and rewinds
Optional loading table
Adjustable speed control
The machine requires a compressed air connection
