GFO Series Rotary Heat Transfer Printer
From the beginning you will notice the difference. More than 30 years experience
manufacturing rotary heat presses has allowed us to refine the design and
add extra features.
Upon receipt of the machine – Lifting bolts atop allow the machine to
be safely removed from
the enclosed crate. Start-up of production – Three super-light air shafts
allow one person to pick up and position the transfer paper, fabric and blotting
tissue (when required). The transfer paper is located directly above the entrance
into the machine, allowing gravity to help feed straight and evenly. Unwind
tension is adjustable with pneumatic tension control.
The fabric is pulled straight up and through an “S” wrap bar that
applies additional tension
to the fabric. From the “S” wrap, the fabric travels over an adjustable
roller to ensure a
straight path into the entrance of the machine. Rewinding of transfer paper
and the printed fabric – Most importantly, the paper and fabric are separated
immediately upon exit from the machine and transported to the rear of the
machine for easy access to the materials and their corresponding rewinds.
Air shafts are used to support the rolls, but the mounts are designed for
one person to be able to both remove finished rolls and drop in empty shafts
and cores. A pneumatic clutch and individual speed controls are used to control
tension. The GFO series is CE certified which guarantees it to meet or exceed
safety standards throughout the world.
Features:
• Oil heated drum w/2 zone control
• Production 3.5 ft/min at 40 second Dwell Time / 1,07 m/min
• Safety bar & reversing control
• 13 inch (33cm) Diameter Drum
• Adjustable Belt Tension
• Brushless DC Motors
• Electro-pneumatic Belt steering System
• Automatic Cool-Down Timer
• 3 super-light Air Unwind shafts & 3 super-lite Air Rewind shafts
• Optional roll up table loading
• Variable speed control
• CE Certified
• The machine needs air connection
